How to verify a Janoshik report: task number + key (2026 guide)

A Janoshik report takes one minute to verify, without going through the seller. You need two codes, not one. Here is where to find them, what the lab confirms, and our six reports to test right now.

Reading time: 4 min

The short answer

Open janoshik.com/verify. Enter the task number ("Task Number", top of the report) and the verification key (bottom). The lab then shows its own copy of the report: compare it line by line with the seller's PDF. The key alone is not enough.

Verify a report on janoshik.com

Who is Janoshik?

Janoshik Analytical is an independent testing laboratory. It does not sell peptides: it measures the ones it is sent. Sellers and researchers send in a sample and get a report back: purity by HPLC, identity by mass spectrometry, actual vial content in mg. Every report gets a task number and a verification key. That is what makes it verifiable by anyone.

Verifying a report, step by step

  1. Note the task number

    Top of the report, "Task Number" line: six digits. Example: 230195 for our Retatrutide 10 mg.

  2. Note the verification key

    Bottom of the report: twelve letters and digits. Example: TZIGFH81MIYD for the same report.

  3. Enter both on janoshik.com/verify

    Both fields, no spaces. The key alone returns nothing: you need the task number with it.

  4. Compare with the seller's PDF

    The lab shows its own copy: sample, purity, content, date, client. One line that differs, and the seller's PDF has been edited.

What the lab confirms, and what it does not

It confirms that the report exists, that it comes from its lab, and what it says: the declared sample, the measured results, the analysis date, the client who ordered it.

It does not confirm that your vial comes from the sample's batch. No report proves that on its own. That is why the client name and the dosage matter as much as the purity figure.

Four signs of a dubious report

The result in the sample name

The "Sample" field already says "99% purity"? The result was announced before the measurement. A sample is named by its molecule and dosage, nothing else.

No task number

Without it, nobody can have the report confirmed. An unverifiable PDF is just a picture.

A different dosage from the product page

A 10 mg report says nothing about a 20 mg vial. Same molecule, same dosage, or nothing.

Ordered by someone else

Read the "Client" field. A report ordered by another client of the manufacturer, then copied from reseller to reseller, describes the manufacturer's production. Not the stock you are buying.

Our six Janoshik reports: verify them now

Ordered and paid for by Atlas Lab Solutions, the company behind this site: its name is in the "Client" field. The five Retatrutide were blind-tested: the lab did not know what it was analyzing. Copy the task number and key into janoshik.com.

ProductPurityMeasured contentTask no.Key
Retatrutide 5 mg99.688 %5.49 mg for 5 mg2302042YDFZGYUMUYZ
Retatrutide 10 mg99.773 %11.43 mg for 10 mg230195TZIGFH81MIYD
Retatrutide 20 mg99.872 %22.51 mg for 20 mg2301977FBQWNBCFL79
Retatrutide 30 mg99.448 %33.51 mg for 30 mg230205CW2M66IWTTBT
Retatrutide 40 mg99.887 %44.41 mg for 40 mg230203ZTJZGRH9YU7R
GHK-Cu 50 mg99.501 %49.06 mg for 50 mg230207L1BQ5R4V2YSJ

Retatrutide: above the label on all five dosages (11.43 mg measured in a 10 mg vial). GHK-Cu 50 mg: 49.06 mg measured, slightly under the label. We publish both, as they are.

Verify a report on janoshik.com

What our reports do not say

Our six reports read "Batch: Unknown": that is the default value of the Janoshik form. We do not make up a batch number. An analysis covers a batch, not a month: its date does not make it expire as long as the batch does not change.

Frequently asked questions

How do I verify a Janoshik report?

On janoshik.com/verify, enter the task number ("Task Number", top of the report) and the verification key (bottom). The lab shows its copy of the report: compare it with the seller's PDF, line by line.

Is the key alone enough?

No. You need the task number AND the key. With the key alone, the verification returns nothing.

What if janoshik.com cannot find the report?

Check what you typed: six digits for the task, twelve characters for the key, no spaces, no mixing up O and 0 or I and 1. Still nothing? Ask the seller for the original report. For our reports, write to us: we send you the PDF and its two codes.

Does Lab Peptides France test every batch?

No, and we do not claim to. We have an analysis run when the risk changes: a new supplier, a new delivery of our flagship product, or a signal from a customer. A product page without a report in our name does not show one.

Does Janoshik sell peptides?

No. Janoshik is a testing laboratory: it measures the samples it is sent and has nothing to sell on the result.

Are these peptides intended for human use?

No. They are reagents sold exclusively for laboratory research (RUO), not for human or veterinary use.

Verify. Then order.