Agua Bacteriostática 10ml Accesorios

Estéril, con alcohol bencílico.

El agua de reconstitución de referencia. Alcohol bencílico 0.9% para estabilidad bacteriostática hasta 28 días. Estéril, apta para todas las reconstituciones de péptidos liofilizados. Indispensable en todo protocolo serio.

12,90 €
Impuestos incluidos • Entrega gratis desde 119€
+0,65 € de cashback en este pedidoCree su cuenta: -10 % en su primer pedido y +0,65 € de cashback.
Cantidad mínima: 11
Impuestos incluidos • Entrega gratis desde 119€
+0,65 € de cashback en este pedidoCree su cuenta: -10 % en su primer pedido y +0,65 € de cashback.

2 lotes por vial pedido: añade un vial para 2 lotes más.

154 en stocksale el jueves, 19 de noviembre
  • Stock en Francia

No olvide lo imprescindible

Se compran juntos a menudo

Retatrutide
GHK-Cu
GHK-Cu 100mg49,00 €
MOTS-c
MOTS-c 10mg32,00 €
Melanotan 2

Lo esencial

Bacteriostatic Water for Injection (BWFI, commonly abbreviated BAC) is the reference solvent used in laboratory settings to reconstitute lyophilized peptides intended for research. Our 10 ml multi-dose vial contains water for injection supplemented with 0.9% benzyl alcohol as bacteriostatic agent. This very preservation distinguishes BAC from classical sterile water (Sterile Water for Injection, SWFI) and enables the multi-puncture use indispensable to peptide research.

En detalle

The practical difference is decisiveA vial of SWFI is designed for single use after opening. Each subsequent puncture creates a progressive contamination risk, as no preservative inhibits bacterial or fungal proliferation after the first septum breach. Conversely, BAC tolerates multiple punctures over several days thanks to benzyl alcohol, which maintains bacteriostatic effect against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Candida albicans, and the majority of germs of clinical interest. This property makes BAC indispensable for peptide protocols where a single reconstituted vial is used over 14-21 days.

The 10 ml format is the "bulk" standard of research laboratories. It covers multiple reconstitutions (typically 3-5 peptide vials of 2-3 ml each depending on the reference), reduces unit cost compared to 3 ml formats, and allows comfortable management of protocols requiring several peptides in parallel. Pharmaceutical type-I glass vial, chlorobutyl stopper, aluminum flip-off capsule. Research Use Only (RUO): not intended for human medicine preparation nor direct clinical use.

Protocolo y preparación

Consulte la ficha de producto para las instrucciones de uso.

Mecanismo de acción

BAC's bacteriostasis rests on a well-characterized biochemical mechanism: benzyl alcohol (C6H5-CH2-OH, phenylmethanol) is a low-molecular-weight amphipathic molecule (108.14 Da) that freely penetrates microorganism lipid membranes and disrupts membrane fluidity at concentrations in the 0.5-2% range. At 0.9%, the concentration is calibrated to inhibit microbial multiplication (bacteriostatic effect) without reaching the outright bactericidal effect that would require higher concentrations. This window is deliberate: a powerful bactericide in an injection solvent would generate concentrations potentially toxic to recipient tissues.

Activity spectrum. Benzyl alcohol at 0.9% maintains bacteriostatic activity on the majority of gram-positive bacteria (Staphylococcus aureus including coagulase-producing strains, Streptococcus pyogenes) and gram-negative (Escherichia coli, Pseudomonas aeruginosa) commonly implicated in injectable contamination. Activity on yeasts (Candida albicans) and some fungi (Aspergillus) is documented but less powerful: severe fungal contamination of a BAC vial may still proliferate slowly beyond 4-6 weeks. Activity on bacterial spores (Bacillus, Clostridium) is nil: a vial contaminated with viable spores will NOT be decontaminated by BAC, hence the importance of initial sterility of the manufacturing process.

Practical duration of the bacteriostatic effect. The USP pharmacopoeia indicates a maximum multi-dose use duration of 28 days after first puncture, conditioned on appropriate storage (room temperature 15-25 degrees or refrigeration 2-8 degrees) and rigorous aseptic manipulations (septum disinfection with 70% alcohol wipe before each puncture, use of fine sterile needle, no solvent reaspiration into the original vial after contact with a peptide). In peptide research, common practice is to reduce this window to 14-21 days for safety, consistent with the stability of the peptides themselves.

Chemical stability of benzyl alcohol. Benzyl alcohol is remarkably stable under normal storage conditions: little sensitive to ordinary light, little sensitive to temperature variations in the 0-30 degree range, little sensitive to humidity (water miscible). The only significant documented degradation is slow oxidation to benzaldehyde then benzoic acid, which can occur in very old vials (>5 years) or ones stored at high temperature. This degradation can produce a characteristic slightly almond-like odor (benzaldehyde) — a vial smelling of bitter almond must be considered suspect.

Compatibility with peptides. The vast majority of research peptides are chemically compatible with BAC at 0.9% benzyl alcohol. A few documented exceptions: (1) peptides very rich in N-terminal tryptophan residues may undergo slightly accelerated oxidation in the presence of benzyl alcohol (DSIP, some alpha-MSH fragments) — solution stability is then reduced to 10-14 days rather than 21 days; (2) some complex protein formulations (insulin, recombinant GH) may interact with benzyl alcohol, but these industrial biologics have their own dedicated diluents; (3) metal-peptide complexes (GHK-Cu notably) are stable in BAC. In daily peptide laboratory practice, BAC 0.9% benzyl alcohol is universally compatible.

Comparison BAC vs sterile water (SWFI) vs saline solutions. SWFI (sterile water for injection): strict single use after opening, no preservative, used in hospital settings to reconstitute single-dose antibiotics and dilute before perfusion. 0.9% saline solution (NaCl 0.9%): isotonic, used in perfusion, available in bacteriostatic versions (NaCl 0.9% + benzyl alcohol) or not. In peptide research, BAC is the standard because its coupling of multi-dose + preservative + near-zero osmolarity (slight hypotonicity negligible at SC injection volumes) matches the dominant use case.

Péptidos similares

The choice of reconstitution solvent for research peptides is simple but deserves explicitness, as several alternatives exist and each has specific use cases.

BAC 0.9% benzyl alcohol vs sterile water for injection (SWFI). SWFI is ultrapure sterilized water without preservative, typically packaged in single-dose ampoules or 10 ml vials. Use: strict single-dose after opening. Theoretical advantage over BAC: total absence of preservative, therefore zero risk of chemical interaction between preservative and peptide. Major disadvantage in peptide research: a 10 ml SWFI vial opened to reconstitute 2 ml of peptide must be DISCARDED after puncture, even if 8 ml remain. Economically and practically, SWFI is unsuited to multi-day protocols. Relevant SWFI use: analytical validation protocols, comparative stability studies, cases where benzyl alcohol exclusion is necessary (documented allergic subject, targeted metabolism study).

BAC 0.9% benzyl alcohol vs 0.9% saline solution (bacteriostatic NaCl). NaCl 0.9% (i.e., 9 g/L or 154 mEq/L) is isotonic with human plasma, which theoretically reduces local irritation at the injection site. Bacteriostatic version: NaCl 0.9% + benzyl alcohol 0.9%, multi-dose use possible as with BAC. Why does simple BAC (without NaCl) remain dominant in peptide research? Because injected volumes are small (typical 0.1-0.3 ml), the osmolarity difference is insignificant at these volumes, and some sensitive peptides may form complexes with sodium-chloride ions. Simple BAC is therefore the default choice, and bacteriostatic NaCl is only indicated for larger injection volumes (>1 ml) or peptides specifically validated in saline formulation.

BAC vs manufacturer-specific diluent. Some industrial biological peptides (insulin, recombinant GH, certain therapeutic GLP-1 analogs) are supplied with their own proprietary diluent, formulated specifically for their target peptide (often with pH adjustment, phosphate buffers, zinc for crystalline insulins). These diluents are not interchangeable with standard BAC for their target product. HOWEVER, for standard research peptides we offer, BAC is the universally valid diluent.

BAC vs non-sterile demineralized or reverse-osmosis water. Frequent question: can demineralized, reverse-osmosis, or distilled non-sterile water be used as an economic alternative? CATEGORICAL ANSWER: NO. Non-sterile water, even of very high chemical purity, contains microorganisms, bacterial endotoxins, and particles that make it strictly unsuitable for reconstitution of injectable solutions. Injection of non-sterile water = major risk of contamination, febrile reaction (pyrogenic endotoxins), local or systemic infection. The quality of USP injectable water is radically different from standard laboratory quality.

BAC vs clean topical cosmetic diluents. For topical cosmetic applications (incorporation into cream, serum), BAC can be used but a dedicated pharmaceutical cosmetic base (lanolin cold cream base, 1% injection-grade hyaluronic acid, glycerol phosphate buffer serum) is often preferable for formulation stability reasons rather than microbiological purity.

Typical use case BAC 10 ml. Laboratory or researcher working on multiple peptides in parallel or on long cycles. A 10 ml vial typically allows reconstitution of 3-5 peptide vials over 14-21 days. Economical format vs 3 ml vials (lower BAC unit price, reduction in packaging count). Default choice for cosmetic laboratory, multi-peptide MSK research (BPC-157 + TB-500), or protocols with peptide combinations.

Typical use case BAC 3 ml. Occasional use, single peptide, need for more frequent rotation to maximize BAC freshness at each reconstitution. Ideal for initial exploratory testing of a peptide before commitment to a full cycle.

Preguntas frecuentes

Why not tap water or demineralized water to reconstitute my peptides?
Categorically no. Non-sterile water, even of high chemical purity (demineralized, reverse-osmosis, non-sterile distilled), contains microorganisms, bacterial endotoxins (thermostable pyrogens), and particles that make it strictly unsuitable for any injection. Injection of non-sterile water = major risk of contamination, febrile reaction (endotoxins), local or systemic infection. BAC is sterile water with 0.9% benzyl alcohol added, supplied in a sealed vial. It is an irreplaceable pharmaceutical consumable for any parenteral preparation.
How long can I use a BAC vial after first puncture?
The USP pharmacopoeia indicates a maximum multi-dose use of 28 days after first puncture, under conditions of rigorous aseptic manipulation (systematic septum disinfection at each puncture, new syringe each time, no reflux). In peptide research practice, the window is often reduced to 14-21 days for safety, aligned with typical reconstituted peptide stability. Beyond, replace the vial even if visually impeccable.
Does 10ml BAC need to be refrigerated?
No, refrigeration is not necessary for BAC. Storage at controlled room temperature (15-25 degrees) in a dry place protected from direct light is perfectly adequate for both unopened and opened vials. The refrigerator (2-8 degrees) is acceptable but may generate condensation on the vial during repeated removals (no impact on BAC but may soften labels). Benzyl alcohol and water are both chemically stable in this temperature range.
Can benzyl alcohol interact with my peptides?
For the vast majority of research peptides (<30 amino acids), 0.9% benzyl alcohol is chemically compatible without significant documented interaction. A few rare exceptions: peptides very rich in N-terminal tryptophan residues (DSIP, certain alpha-MSH fragments) may undergo slightly accelerated oxidation, reducing solution stability to 10-14 days. For these specific peptides, some researchers prefer single-dose SWFI. For all other common peptides (BPC-157, TB-500, GHK-Cu, Semax, Selank, melanotans, research tirzepatide, retatrutide, etc.), BAC is the standard trouble-free diluent.
What's the difference between BAC and bacteriostatic 0.9% NaCl?
BAC = water + 0.9% benzyl alcohol, osmolarity near zero. Bacteriostatic 0.9% NaCl = water + 0.9% NaCl + 0.9% benzyl alcohol, isotonic with plasma. For small peptide injection volumes (typical 0.1-0.3 ml), the osmolarity difference is negligible and simple BAC is preferred. For larger volumes (>1 ml) or peptides specifically validated in saline formulation, bacteriostatic 0.9% NaCl may be indicated. In common peptide research practice, simple BAC covers 99% of cases.
My BAC vial has become cloudy, what should I do?
Discard immediately. A BAC vial must remain perfectly clear and colorless throughout its use period. Any turbidity, haze, visible particles, coloration (yellow, brown), or abnormal odor (bitter almond, putrid) are signs of microbial contamination or degradation. Never attempt to 'sterilize' a suspect vial by filtration, heating, or boiling: microbial contamination remains, and bacterial endotoxins are thermostable. Open a new vial.
How many peptide vials can a 10ml BAC vial reconstitute?
Typically 3-5 peptide vials depending on reconstitution volume per peptide: 3 vials with 3 ml BAC each (i.e., 9 ml, 1 ml margin remaining), OR 5 vials with 2 ml BAC each (10 ml exactly), OR fractionated volumes for exploratory tests. This is the economic and practical format for laboratories working on multiple peptides simultaneously or on long cycles. For occasional use or a single peptide, the 3 ml format may be more suitable (more frequent rotation, always fresh BAC).
Is BAC subject to prescription or regulatory restrictions?
BAC is an industrial-grade pharmaceutical consumable freely available for research use, without prescription required in most European jurisdictions. Our reference is explicitly sold as Research Use Only (RUO): intended exclusively for scientific laboratory research, not intended for human medicine preparation nor direct clinical use. The professional user assumes responsibility for use in compliance with regulatory frameworks applicable to their research activity.
Agua bacteriostática: guía completa para la reconstitución de péptidos de investigaciónLa guía completaAgua bacteriostática: guía completa para la reconstitución de péptidos de investigaciónComposición, papel del alcohol bencílico, diferencias con el agua estéril y el agua para inyección, almacenamiento, uso en laboratorio. La guía de referencia para reconstituir correctamente un péptido.Leer la guía

Lee también:Cómo conservar los péptidos liofilizados: guía completa de almacenamiento para investigaciónKPV: guía completa del tripéptido antiinflamatorio derivado de la α-MSH

Accesorios
Consumibles de laboratorio

Accesorios

Agua bacteriostática estéril + consumibles de laboratorio: todo para reconstituir sus péptidos sin fallos.

Descubrir la gama